Guanhao's removable adhesive label materials are engineered for applications that require a reliable temporary bond — bonding firmly during use, then releasing cleanly from the surface when removed. Ideal for retail price tags, promotional stickers, pharmaceutical outer packaging, and any scenario where a pristine, residue-free surface must be guaranteed after label removal.
As a leading manufacturer of self-adhesive label stock, Zhejiang Guanhao Functional Material Co., Ltd. supplies removable adhesive on a wide range of face stocks — including thermal paper, coated paper (copperplate), woodfree paper, and various film substrates — backed by our in-house acrylic emulsion adhesive technology. All products meet international quality standards and are available for wholesale or custom specification orders.
Removable adhesive (also called repositionable or peel-off adhesive) is a pressure-sensitive adhesive (PSA) formulated with a deliberately lower peel-force than permanent adhesive grades. The adhesive creates an initial bond strong enough for everyday handling, product transport, and normal shelf life — yet allows the label to be peeled away cleanly without tearing the substrate, lifting coatings, or leaving a sticky residue on the product surface.
This is achieved through adhesive chemistry that controls tack, cohesive strength, and crosslink density. Guanhao uses water-based acrylic emulsion systems, which are solvent-free, environmentally friendly, and consistent batch-to-batch.
Key distinction: "Removable" describes the peel behavior of the adhesive from the applied surface — not the durability of the label itself. A removable adhesive label can still be highly water-resistant, UV-stable, and temperature-resistant on its face stock side.
The table below shows representative performance data for Guanhao's standard removable adhesive series. Custom formulations are available on request.
| Parameter | Standard Grade | Enhanced Grade | Low-Temp Grade |
|---|---|---|---|
| Adhesive Type | Water-based acrylic emulsion | Water-based acrylic emulsion | Water-based acrylic emulsion |
| Peel Adhesion (180°, stainless steel) | 4–7 N/25mm | 7–10 N/25mm | 3–6 N/25mm |
| Loop Tack (stainless steel) | 5–9 N/25mm | 9–13 N/25mm | 4–8 N/25mm |
| Holding Power (shear, 1 kg) | ≥ 24 h | ≥ 48 h | ≥ 12 h |
| Service Temperature Range | 0 °C to 70 °C | −10 °C to 80 °C | −30 °C to 60 °C |
| Application Temperature | ≥ 5 °C | ≥ 5 °C | ≥ −10 °C |
| Coat Weight (dry) | 16–20 g/m² | 20–24 g/m² | 16–20 g/m² |
| Residue After Removal | None | None | None |
| VOC Content | Zero | Zero | Zero |
| Shelf Life (sealed) | 12 months | 12 months | 12 months |
* All values are measured at 23 °C / 50% RH after 24-hour dwell time unless stated otherwise. Contact us for test reports.
Removable adhesive is available combined with multiple face stock materials. Select the combination that suits your printing method and end-use environment.
| Face Stock | Finish | Typical Printing Method | Best For | Related Product |
|---|---|---|---|---|
| Thermal Paper | Smooth white | Direct thermal | POS receipts, short-term logistics | Thermal Adhesive › |
| Coated Paper (Copperplate) | Gloss / Matte | Offset, flexo, digital | Retail price tags, product labels | Copperplate Paper Adhesive › |
| Woodfree Paper | Natural white, uncoated | Inkjet, laser, flexo | Office labels, eco-friendly packaging | Woodfree Adhesive › |
| BOPP Film | Gloss / Matte / Transparent | Flexo, digital | Bottle labels, damp environments | Film Adhesive › |
| PET Film | Silver / Transparent | Flexo, screen | Electronics, high-clarity windows | Film Adhesive › |
| PE Film | White / Colored | Flexo | Squeezable containers, conformable labels | Film Adhesive › |
Removable adhesive label stock is trusted across industries that need temporary identification, pricing, or promotion — anywhere a clean surface after removal is non-negotiable.
Price stickers on glass, ceramic, and plastic products that remove cleanly at the point of sale.
Promotional labels or lot-specific overlays that must be removed without damaging primary packaging.
Temporary routing labels on reusable totes, pallets, and containers.
Promotional overwrap and date labels on glass bottles and containers.
"Limited Edition" or seasonal stickers applied to existing product packaging.
QC inspection stickers and warranty seals applied to smooth surfaces during manufacturing.
File folder labels, A4 sheet labels, and note stickers that reposition without tearing paper.
Peel-off promotional coupons attached to personal care and household product bottles.
Explore label solutions by industry: Retail Labels · Drug Labels · Logistics Labels · Electronic Labels · Daily Chemical Labels
| Feature | Removable Adhesive | Permanent Adhesive |
|---|---|---|
| Initial Tack | Medium | High |
| Peel Adhesion | Low–Medium (4–10 N/25mm) | High (12–25+ N/25mm) |
| Residue After Removal | None / Minimal | Often Present |
| Repositionable | Yes | No |
| Surface Damage Risk | Very Low | Moderate–High |
| Long-term Outdoor Use | Limited | Suitable |
| Chemical / Moisture Resistance | Standard | Higher (specialty grades) |
| Typical Use Case | Price tags, promo labels, temp. ID | Permanent branding, shipping, compliance |
| Cost | Comparable | Comparable |
| Advantage | Details |
|---|---|
| In-house Adhesive R&D | We formulate our own acrylic emulsion adhesives, enabling custom tack, coat weight, and environmental performance without relying on third-party adhesive suppliers. |
| Wide Face Stock Range | Thermal, coated paper, woodfree paper, BOPP, PET, and PE — all available with removable adhesive coating in a single factory. |
| Consistent Quality Control | Every production batch undergoes peel adhesion, loop tack, shear, and coat-weight testing. Test reports available on request. |
| Eco-Friendly Production | Water-based adhesives with zero VOC emissions. No solvent discharge. Suitable for food-contact outer packaging in many markets. |
| Scalable MOQ | We supply converters and brand owners at competitive minimums, with roll widths from 210 mm to 1350 mm and custom slitting available. |
| Global Export Experience | Products exported to Europe, Southeast Asia, the Middle East, and North America. Familiar with BV, SGS, and customer-specific test requirements. |
Learn more about our manufacturing advantages and our factory.
What is removable adhesive?
Removable adhesive is a pressure-sensitive adhesive designed to bond securely to a surface during use, then peel off cleanly without leaving sticky residue or damaging the substrate. It is the adhesive of choice for price labels, promotional stickers, and temporary identification tags.
What surfaces can removable adhesive labels be applied to?
Removable adhesive labels perform well on high-energy surfaces such as glass, stainless steel, coated paperboard, and most rigid plastics (PET, HDPE, PP). Adhesion on low-energy surfaces like untreated polyethylene or textured coatings may vary; testing before full-production runs is always recommended.
How long can a removable label stay on the surface before it becomes harder to remove?
Under normal indoor storage conditions (below 30 °C, away from UV), most removable adhesive labels can be cleanly peeled within 6 to 24 months. Prolonged exposure to heat, UV light, or humidity can increase adhesion over time and may make removal harder. Guanhao's Enhanced Grade is formulated to maintain removability over longer dwell periods.
Is removable adhesive safe for food-contact outer packaging?
Guanhao's water-based acrylic removable adhesives are solvent-free and zero-VOC. For indirect food-contact outer packaging, they are generally suitable under applicable regulations. However, specific food-safety compliance (FDA, EU Regulation 10/2011, etc.) should be verified on a case-by-case basis. Please contact us for material safety data sheets and compliance documentation.
Can I print on removable adhesive label stock with a thermal printer?
Yes. Our removable adhesive is available with thermal paper face stock, allowing direct thermal printing. This is the most common choice for retail price tags and short-shelf-life logistics labels. See our Thermal Adhesive product line for specifications.
What is the minimum order quantity (MOQ) for removable adhesive label stock?
MOQ depends on the face stock type, roll width, and adhesive grade selected. Please send us your specifications for a customized quotation. We serve both mid-size converters and large-volume brand owners.
Removable adhesive is just one part of Guanhao's comprehensive self-adhesive label material portfolio. If permanent bonding, specialty film substrates, or eco-certified papers are needed, explore our full range below.
Browse our full product catalogue or explore label applications by industry: A4 Flat Sheet Labels · Tire Labels · Industrial Labels · Drinking Water Labels
Our technical team will help you select the right face stock, adhesive grade, and liner combination for your application.
